Agilent Technologies E8362 Service Guide

Service Guide E8364-90038 4-35
PNA Series Microwave Network Analyzers Troubleshooting
E8362C, E8363C, E8364C Measurement System Troubleshooting
6. If the signals are <-30 dBm or not present, replace the A17 LOMA 10. Refer to “Removing and Replacing
the A17 LOMA 10” on page 7-34.
7. If the signals are present, reconnect cable W18, and then continue with “Checking the A18 MA 20
Output” on page 4-37.

Agilent Technologies E8362 Specifications

General

Brand	Agilent Technologies
Model	E8362
Category	Measuring Instruments
Language	English