Agilent Technologies E8362C - Step 5. Disconnect the A12 Source 20 to A22 Switch;Splitter Cable at the A12 Source 20

Installation Note E8362-90004 13
Step 5. Disconnect the A12 Source 20 to A22 Switch/Splitter Cable at
the A12 Source 20
1. Using a 5/16-inch wrench, disconnect the A12 source 20 to A22 switch/splitter cable, W1, at
the A12 source 20 as shown.
Figure 5 A12 Source Cable Disconnection