Agilent Technologies EPM-P Series Installation Guide

Remote Interface Configurations Getting Started
EPM-P Installation Guide 29
RS232/RS422
To check the settings for the RS232 or RS422 interfaces press ,
, , . The settings are displayed
below the respective softkey labels. Press to access the next menu page.
To change any setting:
1 Press , , , .
2 Select the parameter you want to change by pressing the softkey.
3 Use the and keys to select (highlight) the digit you want to change;
use the and keys to increase or decrease the value. Press to
confirm and save the new value. Pressing restores the previous
value.
4 Press to access the second page of the settings menu.
To configure the power meter to use the serial RS232 or RS422 interfaces press
, , , , or .
System
Remote Interface
Configure Interface
Serial
More
System
Remote Interface
Configure Interface
Serial
Enter
Cancel
More
System
Remote Interface
Select Interface
RS232
RS422
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Agilent Technologies EPM-P Series Specifications

General

Brand	Agilent Technologies
Model	EPM-P Series
Category	Measuring Instruments
Language	English