Regulatory Information General Specifications
36 EPM-P Installation Guide
General Specifications
Environmental Operating Temperature: 0 to +55°C
Storage Temperature: −20 to +70°C
Humidity: Up to 95% Relative Humidity to +40°C
Altitude: 3000m (9,840 ft.)
EMC: MEETS EN55011: 1991 (GROUP 1,
C
LASS A), AND EN50082-1:1992
Physical Weight: 4.2 kg nominal
Dimensions: (height x width
x depth)
130H x 250W x 462D mm nominal
(including handle and rubber bumpers)
88H x 212W x 363D mm nominal
(excluding handle and rubber bumpers)
Power
Requirements
Operating Voltage Range: 85 - 264 Vac
Operating Frequency
Range:
47 - 440Hz
Power Dissipation: 50 VA (maximum)
Cooling
Requirements
To provide adequate cooling, and air gap of approximately 75mm (3ins) should
be maintained around the vented sections of the instrument.
Cleaning Use a soft, clean, damp cloth to clean the front-panel and side covers.
Use This instrument is designed for indoor use only.
WARNING Appliance coupler (mains input power cord) is the power disconnect device. Do
not position the instrument such that access to the coupler is impaired.
WARNING For continued protection against fire hazard, replace the line fuse only with the
same type and line rating (250V, F3.15A, 20mm fast blow fuse with high
breaking capacity, Agilent part number 2110-0957).
The use of other fuses or materials is prohibited.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
