Regulatory Information Compliance and Markings
38 EPM-P Installation Guide
Compliance and Markings
IEC 61010-1 Compliance
This instrument has been designed and tested in accordance with publication
EN61010-1(1993) / IEC 61010-1(1990) +A1(1992) +A2(1995) / CSA C22.2
No. 1010.1(1993) Safety Requirements for Electrical Equipment for
Measurement, Control and Laboratory Use, and has been supplied in a safe
condition. The instruction documentation contains information and warnings
which must be followed by the user to ensure safe operation and to maintain the
instrument in a safe condition.
Electromagnetic Compatibility (EMC)
This product conforms with the protection requirements of European Council
Directive 89/336/EEC for Electromagnetic Compatibility (EMC).
The conformity assessment requirements have been met using the technical
Construction file route to compliance, using EMC test specifications EN
55011:1991 (Group 1, Class A) and EN
50082-1:1992.
In order to preserve the EMC performance of the product, any cable which
becomes worn or damaged must be replaced with the same type and
specification.
Refer to the Declaration of Conformity on page 41.
Safety
This instrument has been designed and tested in accordance with publication
EN61010-1(1993) / IEC 1010-1(1990) +A1(1992) +A2(1995) / CSA C22.2 No.
1010.1(1993) Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, and has been supplied in a safe condition. The
instruction documentation contains information and warnings which must be
followed by the user to ensure safe operation and to maintain the instrument in a
safe condition.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
