62 Agilent 1200 Series Valves
6 Specifications
Table 25 G1157A Agilent 1200 Series 2 position / 10 port valve
Liquid contacts: Stainless Steel and PEEK
Port size: Accepts 10-32 male threaded fittings
Flow passage diameters: Stator and stator face assembly 0.6-mm (0.024”), rotor seal 0.6-mm
(0.024”)
Volume in flow passage: Stator (includes stator face seal) 2.1 µl/hole, rotor seal 0.7
µl/groove
Maximum pressure: 41 MPa (408 bar, 6000 psi)
Recommended flow range: 0.2 - 100 ml/min
Table 26 G1158A Agilent 1200 Series 2 position / 6 port valve
Liquid contacts: Stainless steel, PEEK, and alumina ceramic
Port size: Accepts 10-32 male threaded fittings
Flow passage diameters: Stator and stator face assembly 0.4-mm (0.015”), rotor seal 0.5-mm
(0.018”)
Volume in flow passage: Stator (includes stator face seal) 0.7 µl/hole, rotor seal 0.3
µl/groove
Maximum pressure: 41 MPa (408 bar, 6000 psi)
Recommended flow range: 0.2 - 100 ml/min
Table 27 G1159A Agilent 1200 Series 6 position selection valve
Liquid contacts: Stainless steel and PEEK
Port size: Accepts 10-32 male threaded fittings
Flow passage diameters: Stator 0.6-mm (0.024”), stator face assembly and rotor seal 0.4-mm
(0.015”)
Volume in flow passage Angled ports 1, 2, 5 (15.6 µl)
Radial ports 2, 4, 6 (18,8 µl)
Maximum pressure: 35 MPa (345 bar, 5000 psi)
Recommended flow range: 0.3 - 40 ml/min
*
To Next Page
Loading...
Need help?
General
