Name: Agilent Technologies G1157A
Brand: Agilent Technologies
Rating: 4 (1 reviews)

To Next Page

To Previous Page

8 Agilent 1200 Series Valves

1 Installation and Configuration

Site Requirements

The requirements for the Agilent 1200 Series Valves are displayed Table 1 and

Table 2 on page 8. The 24 Volts DC power can be supplied by an external

power supply (0950-4422) or by one of the following Agilent 1200 Series LC

modules with DC CAN adapter.

• Agilent 1200 Series preparative pump (G1361A)

• Agilent 1200 Series fraction collectors (G1364A, G1364B, G1364C, G1364D)

• Agilent 1200 Series high performance autosampler(G1367B)

• Agilent 1200 Series micro well-plate autosampler (G1377A)

• Agilent 1200 Series dual-loop autosampler PS (G2258A)

Table 1 Site Requirements for Agilent 1200 Series Valves

Type Specification

• Weight 1.9 Kg (4.2 lbs)

• Dimensions

• (height x width x depth)

92 x 84 x 200 mm

(9.2 x 3.3 x 8.0 inches)

• Power supply 24 Volts DC (1.7 amps)

• Ambient operating temperature 4 to 55°C (39 to 131°F)

• Humidity < 95%, non-condensing

• Safety Standards IEC, CSA, UL, EN

Installation category II,

pollution degree 2

For indoor use only

Table 2 System Requirements

Revision

• Agilent 1200 Firmware A.05.04 and higher

• Control Module Firmware G1323B B.03.11 and higher

• Agilent ChemStation Software A.09.03 and higher

Questions and Answers:

Need help?

Do you have a question about the Agilent Technologies G1157A and is the answer not in the manual?

Agilent Technologies G1157A Specifications

General