10 5977B Series MSD Operating Manual
To Connect/Disconnect Wiring from the EI XTR, SS, and Inert
Sources 197
To Disassemble the EI SS or EI Inert Source 198
To Disassemble the EI XTR Source 201
To Clean an EI XTR, SS, or Inert Source 204
To Assemble an EI SS or Inert Source 209
To Assemble the EI XTR Source 212
To Replace a Filament in an EI XTR, SS, or Inert Source 215
To Install the EI XTR, SS, or Inert Source 217
To Replace the Electron Multiplier Horn 218
To Close the Analyzer Chamber 220
8 CI Maintenance
General Information 222
To set up your MSD for CI operation 222
To Switch from the EI HES to the CI Source 223
To Remove the EI HES Radiator 224
To Connect/Disconnect Wiring to the EI HES Radiator 225
To Install the CI Source Radiator 227
To Switch from the CI Source to the EI HES 229
To Remove the CI Source Radiator 230
To Install the EI HES Radiator 232
To Switch from an EI XTR, SS, or Inert Source to the CI
Source 233
To Switch from the CI Source to an EI XTR, SS, or Inert
Source 234
To Remove the CI Source 235
To Next Page
Loading...
Need help?
General
