5977B Series MSD Operating Manual 7
To Install the GC/MSD Interface Tip Seal 74
The GC/MSD Interface for a 9000 Series GC 76
4 Installing 7890 GC Columns
Columns 78
Conditioning columns 79
Conditioning ferrules 79
Tips and hints 79
To Install a Capillary Column in a Split/Splitless Inlet 80
To Condition a Capillary Column 83
To Install a Capillary Column in the GC/MSD Interface Using the
Self-Tightening Column Nut 84
To Install a Capillary Column in the GC/MSD Interface Using a
Standard Column Nut 89
To Install the GC/MSD Interface Tip Seal 93
To Calibrate Column Flow Linear Velocity in a 7890 GC 95
The GC/MSD Interface for a 7890B Series GC 98
5Operating in EI Mode
Operating the MSD from the DS 103
Operating the MSD from the 7890 GC Control Panel 104
Configuring the MSD through the Web User Interface
(WUI) 108
To change the network settings of the MSD 108
eModule Mini Display Readout 111
Front Panel Instrument Status LED 112
Before You Turn On the MSD 113
Pumping Down 114
To Next Page
Loading...
Need help?
General
