Agilent Technologies
Intended Use
Agilent products must only be used in the manner described in the Agilent
product user guides. Any other use may result in damage to the product or
personal injury. Agilent is not responsible for any damages caused, in whole
or in part, by improper use of the products, unauthorized alterations,
adjustments or modifications to the products, failure to comply with
procedures in Agilent product user guides, or use of the products in violation
of applicable laws, rules or regulations.
Cleaning
To clean the unit, disconnect the power and wipe down with a damp, lint-free
cloth.
Fume Hood
During normal operation of the GC with many detectors and inlets, some of
the carrier gas and sample vents outside the instrument through the split vent,
septum purge vent, and detector exhaust. If any sample components are toxic
or noxious, or if hydrogen is used as the carrier gas, these exhausts must be
vented to a fume hood. Place the GC in the hood for proper ventilation.
Recycling the Product
For recycling, contact your local Agilent sales office.
To Previous Page
Loading...
Need help?
General
