Need help?Do you have a question about the Agilent Technologies 1260 Infinity and is the answer not in the manual?
General| Data Sampling Rate | Up to 80 Hz |
|---|---|
| Type | HPLC System |
| Pump | Quaternary Pump |
| Flow Rate Range | 0.001 to 5 mL/min |
| Pressure Range | Up to 600 bar (G1311B/C/E, G1312B/C/E) |
| Flow Rate Accuracy | ±1% |
| Flow Rate Precision | <0.07% RSD |
| Detector | Diode Array Detector (DAD), Variable Wavelength Detector (VWD) |
| Wavelength Range | 190 to 950 nm (VWD), 190 to 950 nm (DAD) |
| Injection Volume Range | 0.1 to 100 µL |
| Software | OpenLAB CDS or ChemStation |
| Column Compartment Temperature Range | 80 °C |
| Power Requirements | 100-240 V, 50/60 Hz |
| Autosampler | 1260 Infinity Standard Autosampler or High Performance Autosampler |
Details the instrument's operation and components.
Explains the working principle of the binary pump.
Describes the solvent flow path within the pump.
Information on environmental and power considerations for installation.
Details weight, dimensions, power, temperature, and humidity.
Lists flow, pressure, precision, and accuracy specifications.
Explains different system configurations for optimal performance.
Step-by-step guide for installing the binary pump.
Describes how to connect tubing with a solvent selection valve.
Describes tubing connections without a solvent selection valve.
Procedures for priming the pump system before use.
Tips for optimal operation and maintenance of the pump.
Guidance on setting up the pump using the Instant Pilot.
Details essential pump parameters like flow, stop time, and pressure limits.
Procedure to bypass damper and mixer for low delay volume.
Optimizing solvent compressibility compensation for accuracy.
How to calibrate compressibility for unlisted or premixed solvents.
Overview of module status indicators and diagnostic tests.
How error messages are displayed and handled.
Common error messages like Timeout and Shutdown.
Errors specific to the module's operation.
Tests system leak tightness by monitoring flow against a blank nut.
Verifies hydraulic operation and diagnoses valve, seal, or piston issues.
Generates compressibility data for unlisted or premixed solvents.
Compensates for pressure-dependent elasticity for improved performance.
Verifies internal pump tightness and identifies leak causes.
Outlines common maintenance tasks and their frequency.
Describes the instrument's firmware structure (resident and main systems).
Explains various electrical connections and interfaces.
Lists interfaces supported by Agilent 1200 Infinity Series modules.
How to configure the module using DIP switches for communication.
General safety precautions and symbols.
To Next Page
