Need help?Do you have a question about the Agilent Technologies 1260 Infinity G1315C and is the answer not in the manual?
General| Type | Diode Array Detector (DAD) |
|---|---|
| Max Pressure | 400 bar |
| Wavelength Range | 190-950 nm |
| Detector Type | Diode Array Detector |
| Light Source | Deuterium and tungsten lamps |
| Data Acquisition Rate | Up to 80 Hz |
| Path Length | 10 mm |
| Cell Volume | 13 µL |
| Flow Cell Volume | 13 µL |
| Flow Cell Path Length | 10 mm |
| Weight | 12 kg |
| Flow Rate Range | Up to 10 mL/min |
| Bandwidth | 1 nm |
| Diode Resolution | 1 nm |
| Drift | < 1 x 10^-3 AU/h |
| Spectral Bandwidth | 1 nm |
| Operating Pressure | Up to 400 bar |
| Operating Temperature | 4°C to 55°C |
Provides an overview of the detector and its key features.
Outlines environmental and power considerations for instrument installation.
Lists key performance metrics such as detection type, data rate, and wavelength range.
Step-by-step guide for installing the detector module into the system.
Explains how to prepare the system and configure an analysis.
Details methods to optimize key analytical parameters for best results.
Explains how error messages are displayed and their general meaning.
Details error messages specific to the detector module.
Describes the automated self-test procedure and its individual tests.
Provides instructions for verifying and calibrating the detector's wavelength accuracy.
Highlights safety precautions to be observed during maintenance procedures.
Details the required TCP/IP settings for network operation.
Explains how to select network initialization modes like Bootp or DHCP.
Provides general safety precautions for operating and maintaining the instrument.
To Next Page
