Agilent 1260 Infinity DAD and MWD User Manual 169
Maintenance
9
Exchanging a Lamp
Exchanging a Lamp
When If noise or drift exceeds application limits or lamp does not ignite
Tools required Description
Screwdriver, Pozidriv #1 PT3
Parts required # p/n Description
1 2140-0820 Longlife Deuterium lamp “C“ (with black cover and RFID tag)
1 G1103-60001 Tungsten lamp
Preparations Turn th e lamp(s) off.
Eye damage by detector light
Eye damage may result from directly viewing the light produced by the deuterium
lamp used in this product.
➔ Always turn the deuterium lamp off before removing it.
Injury by touching hot lamp
If the detector has been in use, the lamp may be hot.
➔ If so, wait for lamp to cool down.
To Next Page
Loading...
