Need help?Do you have a question about the Agilent Technologies Graphite Tube Atomizer GTA 120 and is the answer not in the manual?
General| Type | Graphite Tube Atomizer |
|---|---|
| Model | GTA 120 |
| Temperature Range | up to 3000 °C |
| Heating Rate | Up to 2000 °C/s |
| Cooling | Water-cooled |
| Heating Program | Programmable |
| Compatibility | Designed for use with Agilent AA Spectrometers |
Ensures the instrument is returned to a safe state after maintenance and safety systems are functioning correctly.
Details potential dangers from high voltages within the GTA electronic control module.
Highlights risks associated with the use and storage of compressed gases for the GTA.
Explains the types of inert gases required for the GTA's normal and alternate inlets.
Specifies requirements for the cooling water supply, including temperature and flow rate.
Explains the connection and operation of gas supplies for the GTA, including normal and alternate inlets.
Prerequisites and steps for installing the GTA, including safety checks and instrument setup.
Step-by-step guide for installing the GTA furnace, covering both Non-Zeeman and Zeeman models.
Step-by-step instructions for removing and replacing electrodes in both Non-Zeeman and Zeeman GTA models.
To Next Page
