114 1260 Infinity Binary Pump User Manual
7 Error Information
Module Error Messages
Temperature Out of Range
Error ID: 2517
Temperature Out of Range 0: Pump channel A
Temperature Out of Range 1: Pump channel B
One of the temperature sensor readings in the motor- drive circuit are out
of range.
The values supplied to the ADC by the hybrid sensors must be between
0.5 V and 4.3 V. If the values are outside this range, the error message is
generated.
Probable cause Suggested actions
1 Defective main board.
Please contact your Agilent service
representative.
To Next Page
Loading...
