AGT PSG MAK10 User Manual

Installation-, Operating-, Maintenance-Manual, Spare part List MAK10
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted
Page 28
Translation - Manual MAK10 Rev. 11/2017
Service
Replacing the filter cartridge (optional)
Cartridge must be replaced in case of contamination. The sample gas pump must be switched
off before changing it. The clamping nut of the filter casing can then be removed. Notice: The
filter glass may slip out of the clamping nut. Protect the filter glass from falling! After
unscrewing the clamping nut, the filter cartridge can be replaced by taking it out an inserting a
new one. The clamping nut must now be fixed along with the filter glass.
Reset the operating hours counte
r
By simultaneously pressing (2 sec.) the operation buttons 2-TEMP and 3-MODE the operating
hours counter can be reset to zero. The service LED turns off. This action should take place only
after proper maintenance of the cooler.

AGT PSG MAK10 Specifications

General

Brand	AGT
Model	PSG MAK10
Category	Accessories
Language	English