Installation-, Operating-, Maintenance-Manual, Spare part List MAK10
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted
Page 30
Translation - Manual MAK10 Rev. 11/2017
Service
Spare Parts
Pre-Separator (Option)
Article-Description Article-No.
Complete pre-separator set with condensate pump SR25 for external mounting 8480101
Flow/separation chamber 6404000
Flowmeter (Option)
Article-Description Type Article-No.
Flowmeter with needle valve / wall-mounted devices 14-140Nl/h, 45° position 6507009
Flowmeter with needle valve / 19“-rack-models 15-150Nl/h, 90° position 6507005
Lightbarrier for flowmeter 5702010
Electronic control EC72.01 unit for lightbarrier 5201047
Straight screwed coupling PVDF G1/8“ DN4/6 6353979
Acid Injection (Option)
Article-Description Type Article-No.
Complete condensate pump SR25 1u/min - installation version 6406008
Replacement hose set N3,2x1,6mm with bolted joint – 42ml/h Standard 8600002
Replacement hose set N1,6x1,6mm with clamps – 12ml/h Special 8480177
Replacement roller carrier 6406053
Replacement conveying belt 6406061
Heat-Exchanger
Article-Description Article-No.
Heat-exchanger MAK10 PVDF/PTFE 8410779
Viton connecting hose 4410312
Hose clamp 6940580
Bulkhead connector for gas inlet/outlet PVDF 6353978
Thermal transmission paste tube 50g 6938110
Thermal transmission paste tube 250g 6938111
Only qualified personnel should perform troubleshooting, maintenance or repair operations.
Please contact directly the manufacturer AGT-PSG if the sample gas cooler fails. Tampering the
safety and security devices is not permissible.
To Next Page
Loading...
Need help?
General
