Aico RadioLINK Ei450 User Manual

Instruction Manual
Read and retain carefully for as long as the product is being used. It contains vital information on the operation and installation of your
Alarm Controller. The booklet should be regarded as part of the product.
If you are just installing the unit, the booklet must be given to the householder. The booklet is to be given to any subsequent user.
Model: Ei450
Alarm Controller
Fire and CO

Aico RadioLINK Ei450 Specifications

General

Frequency	868 MHz
Battery Life	10 years
Radio Frequency	868 MHz
Operating Temperature	0°C to 40°C
Power Supply	Lithium Battery
Interconnectivity	Wireless
Test Feature	Yes
Range	Up to 100m in free air
Battery Type	3V Lithium
Radio Range	Up to 100m in free air
Humidity Range	15% to 95% RH
Standards	EN 300 220-2, EN 301 489-3

Summary

1. Overview

Alarm Controller functionality

Details the functions of the Alarm Controller, including Test, Locate, Silence, and indicator functions.

Typical System Layout

Power up sequence

3. House Coding

Reset the house code

4. Operation

Testing the alarm system

Explains the procedure for testing the alarm system, including button presses and expected indicator feedback.

Walk round test (optional)

Details an optional method for testing the system by physically walking around the premises.

When the alarm system sounds

Provides immediate actions and guidance for responding when the alarm system is activated.

Locate the source Alarm(s)

Describes how to identify the specific alarm device that triggered the system alert.

Silence the source Alarm(s)

Explains the process for silencing an individual alarm or group of alarms after a confirmed event.

Temporary Alarm Activation

Details how the system handles temporary or false alarm conditions and returns to normal.

5. Guarantee

6. Troubleshooting the RadioLINK

7. Technical Specification

8. Getting the Alarm Controller serviced

9. System Diagnostics

System Diagnostic Mode

Introduces the special diagnostic mode for installation and maintenance personnel.

Two minute - Long test

Details a 2-minute system test within the diagnostic mode as an alternative to walk-around testing.

Check Alarm memory

Explains how to recall and identify previously activated alarms stored in the system's memory.

Erase Alarm memory

Provides instructions on how to clear the stored alarm history from the controller's memory.

10. Contact Us