θ
L
N
E
N
L
θ
Max
Do not put the inner pot on other
appliance for heating
● In order to avoid deformation or fault.
Please use the special inner pot.
Do not use in the following locations
● Do not use in unstable locations;
● Do not use in locations near water and
fire; Do not use near walls and furniture;
● Do not use in locations exposed to direct
sunlight and oil splatter.
● Do not approach the stove for avoiding
fire.
Environment for storing the Product
Clean after use
Electrical Schematic Diagram
● Periodically clean the cooker and remove oil and dirt if it is
stored on the table.
● Put the electric pressure cooker 30cm away from other
kitchen appliances.
1.Clean after each use.
2.Before cleaning and maintenance, please unplug the
power cord until the product cool down.
3.Remove the lid and inner pot, clean with detergent first,
then rinse well with water and wipe dry with a soft cloth.
4.Clean the internal side of the lid with water, the seal ring,
block proof cover,
exhaust valve core and float valve can be removed for
washing, timely and correctly install them after washing, and
then dry the internal side of lid with cloth.
5.Wipe clean the cooker body with a rag, and it is prohibited
to soak the cooker body in water or spray water to it.
AC Input
Transmit Board
Wireless
Connecting Line
Power Board
Connecting Line
Bottom Temperature
Sensor
Top Switch
Pressure Switch
Display Board
Receive Board
TOP Temperature Sensor
Pressures Sensor
Temperature Fuse
Temperature cut-out
Heater
29 30
To Next Page
Loading...
