5 / 27
3、General information
3.1 Module identification
Three kinds of visual labels provided by AIKO’s modules:
Nameplate：Product type, rated power under standard test conditions (STC), rated current,
rated voltage, open circuit voltage, short circuit current under STC, certification mark, maximum
system voltage and other information
Serial number：Each module has a unique serial number. This serial number is printed on
the bar code and placed in the assembly before lamination, and cannot be torn or coated after
lamination. In addition, an identical serial number can be found on or next to the module
nameplate.
Current grading label(if necessary): The modules of the same gear are second graded by
rated current and marked for differentiation on the modules.
To Next Page
Loading...