Need help?Do you have a question about the AINA PTT and is the answer not in the manual?
General| Brand | AINA |
|---|---|
| Model | PTT |
| Category | Two-Way Radio |
| Language | English |
Turn on the PTT Voice Responder by holding the Power button for more than 3 seconds until a blinking green light appears.
Navigate to iPhone Settings, select Bluetooth, and toggle the switch to 'On' to enable Bluetooth.
Select your Voice Responder from the iPhone's device list to establish a Bluetooth connection.
The responder pairs with one device at a time; a software reset is needed to pair with a new device.
Search for and install the 'Zello Walkie Talkie' application from the iTunes App Store on your iPhone.
Open the Zello application and follow the on-screen prompts to create a new user account.
If you already have a Zello account, log in using your existing username and password.
Open Zello, tap the menu icon (three horizontal lines), and select 'Options'.
Navigate to the 'Push To Talk button' setting within Zello's options.
Select 'Wireless Zello button' and enable the function to connect your PTT Voice Responder.
Ensure the Voice Responder is connected via Bluetooth if it's not found in Zello.
In Zello, tap the menu and select 'Contacts' to view your list of contacts.
Choose the 'echo' contact from your Zello contacts list for audio testing.
Press and hold the primary PTT button on the responder, speak, and release to test audio transmission.
Your spoken message will be played back through your device's speaker after transmission.
Press and hold the Power button for over 3 seconds to turn the device on or off.
Press the Emergency button to send an alert to a selected Zello contact.
Use Primary PTT to speak; Secondary PTT for pre-assigned contacts/channels.
Volume buttons adjust speaker volume; Soft buttons change channels or activate modes.
To Next Page