This is an abbreviated programming manual addressing basic program settings for an IXG Series system using the
IXG Support Tool.
A complete set of instructions (IXG Operation Manual / IXG Support Tool Setting Manual) can be found at
www.aiphone.com/IXG, along with additional literature and media.
ATTENTION:
IXG SERIES
IP Multi-Tenant Video Intercom
If updating dimensions, be sure to update the GLC layer too.
Please refer to the Product Dimensions Master located here:
H:\Engineering Services\Product Dimensions Master Document\Product Dimensions Master.xlsx
IXG-2C7
8-15 / 16 " 1"
5-13 / 16 "
If updating dimensions, be sure to update the GLC layer too.
Please refer to the Product Dimensions Master located here:
H:\Engineering Services\Product Dimensions Master Document\Product Dimensions Master.xlsx
IX-DV
IX-DV
8-1/ 8 "
4-1/ 2 " 1-3/4"
If updating dimensions, be sure to update the GLC layer too.
Please refer to the Product Dimensions Master located here:
H:\Engineering Services\Product Dimensions Master Document\Product Dimensions Master.xlsx
IXG-DM7
7-3/16 "
1-1/2"1/2"
13 -11/16 "
Quick Start Programming Guide
IXG Support Tool version 5.0.1.0
04/24
Table of Contents
Page 2 General Overview
Page 3-10 Creating a New System
Page 11 Mobile App Integration
Page 12 Property Manager Account Creation
Page 13 Entrance Station Settings
Page 14 Station Partitioning
Page 15 Additional Settings
Page 16-17 IXW-MA(A) Programming
Pages 18-19 Updating Station Firmware
Pages 20-23 Network Security Summary
Page 24 Notes
To Next Page
Need help?
General
