Aiphone JM-4MED - Setting the PIN [GENERAL] - [PIN SETTING]

10
Setting the PIN
[GENERAL] - [PIN SETTING]
Some settings require a PIN to prevent content from being
altered by unauthorized individuals.
Create a unique PIN to properly secure settings.
The factory default is "1111".
*
From HOME window, touch
1
SETTINGS
→
GENERAL
→
PIN SETTING
.
The current PIN entry window is displayed.
Enter the current 4-digit PIN. (For fi rst time users,
2
default is "1111").
Touch
3
ENTER
.
The new PIN entry window is displayed.
If a wrong PIN is entered, an error message will be
*
displayed requesting the correct PIN.
Enter the new 4-digit PIN.
4
When the setting has fi nished, touch
5
ENTER
.
The new PIN is now stored.
You can change the PIN any time by following the above
procedure.
NOTES:
When this station is initialized by the [INSTALL] menu, the PIN
•
returns to "1111" (default).
You must keep the PIN without fail. If you forget the PIN, you
•
must initialize this station by the [INSTALL] menu, thus all the
setting contents return to default.