24
Monitoring
You can monitor a door station or sub master station.
■
Monitoring door station (entrance)
When monitoring an audio door station, only audio from the
*
station is available. When monitoring a video door station,
audio and video images are available.
Press the [HOME] button or touch screen.
1
Touch
2
MONITOR
from HOME window and select
the door station to monitor.
Audio will be heard and if the station has a camera, images
can be viewed.
During monitoring, audio cannot be heard with handset.
*
If there is a visitor at the entrance, touch
*
TALK
or lift
handset to begin communication.
To end monitoring;
3
Touch
BACK
on the screen or press the [HOME]
button.
Available functions during monitoring
Zoom/Wide camera control (→P. 19)
•
When monitoring is started, an image is shown in wide
*
mode.
Pan & Tilt
•
(→P. 20)
Adjusting images
•
(→P. 20)
Door release
•
(→P. 22)
Volume control (→P. 21)
•
Manual recording (→P. 25)
•
OPTION
•
(→P. 30)
If a CCTV camera is connected instead of a video door station at
entrance:
Audio monitoring and communication is available if an audio door
station is connected with a CCTV camera.
NOTES:
Monitoring ends automatically after set time.
•
The night illumination is automatically activated on door station,
•
depending on settings.
■
Monitoring sub master station (Audio only)
You can monitor sounds at a sub master station.
Press the [HOME] button, touch screen, or lift
1
handset.
Touch
2
MONITOR
from HOME window and select
the sub master station to monitor.
A call tone sounds at both this station and target station,
and then the symbol image for monitoring is displayed on
the screens of both stations.
Use "
*
" or " " to scroll between stations.
Audio from the target station can be heard at this
3
station.
If there is no operation for approx. 1 minute, the screen
*
turns off. (The monitoring is continued.)
If you have received a call from another station,
*
monitoring is temporarily suspended. Monitoring
resumes after call is fi nished.
To end monitoring;
4
Touch
BACK
on the screen or press the [HOME]
button of this station.
NOTES:
An alert will sound if a sub master station has disabled the audio
•
monitoring feature.
While monitoring a sub master station, no operation is possible
•
on the sub master station. To end monitoring, make an ending
operation on this station.
A new monitoring action takes priority over current monitoring.
•
During monitoring, for example, if another station starts
monitoring this station, current monitoring by this station is
cancelled.
Monitoring ends automatically after a lapse of set time.
•
To Next Page
Loading...
