Aiphone Master Station IX-MV - Setting the date and time

12
Before Using
2
Setting the date and time
1
Instandbymodeoronthemenu
screen,press
DisplaytheSETTINGS[CALLING]Screen
(001/008).
Duringconfiguration,thesettingindicatoris
ON.
2
or willdisplay
“SETTINGS[OTHER](008/008)”
3
or willselect“DATEAND
TIMESETTING,”thenpress
DisplaytheDATEANDTIMESETTING
screen.
Thedateandtimeisusedforincomingandoutgoingcallhistory.
Initialvalue:01/01/201300:00
4
Changethedateandtimeby
pressing again
Howtochangethedateandtime
or

:
Movethecursoroverthe
items“year,month,date,hour,
minute.”
or

:
Changethenumericalvalueof
theselecteditem.
Bypressingandholding,the
selectionwillchangerapidly.
5
Press
Dateandtimeareset.
• When“BACK”isdisplayedonthescreen,press
toreturnbackonescreen.
• Clockaccuracymaydeviateasmuchas±1minute
permonth.
• Ifthepoweristurnedoffforatleast30minutesin
aneventsuchasapoweroutage,thedateand
timewillrevertbacktothedefaultsetting.Ifthis
occurs,setthedateandtimeagain.
• Ifnothingispressedforapprox.1minute,the
stationwillreturntothestandbystate.
Notice
Settingthedateandtime