To Next PageTo Next Page
Need help?Do you have a question about the Air Liquide M 130 and is the answer not in the manual?
General| Brand | Air Liquide |
|---|---|
| Model | M 130 |
| Category | Welding System |
| Language | English |
Safety guidelines for installing the welding equipment.
Recommended safety gear and precautions for personal protection during welding operations.
Precautions to minimize the risk of fire and explosion during welding.
Information on welding fumes and gases being hazardous if inhaled.
Guidelines for safely carrying and handling the welding machine.
Warnings regarding magnetic fields affecting pacemaker wearers.
Information on high-frequency emissions interfering with electronic equipment.
How arc welding electromagnetic energy can interfere with sensitive electronics.
Procedures to reduce magnetic fields generated by welding current.
List of principal safety standards relevant to welding and cutting.
Technical specifications for M 130 and M 170 welding machines.
Detailed description of the M 130 and M 170 welding machines.
List of items included with the welding machine package.
Explanation of duty cycle and overheating behavior of the welding units.
Volt-ampere curves illustrating welding power source capabilities.
Instructions for connecting the welding equipment to the main power supply.
Guidelines for choosing a suitable and safe location for the welding equipment.
Instructions on how to change the welding polarity (DCEN/DCEP).
Step-by-step guide for installing the welding gun.
Procedures for installing the wire spool and adjusting hub tension.
Steps for feeding the welding wire into the welding gun.
Instructions for installing the SG 185 Spool Gun.
Explanation of the controls located on the front panel of the welding machine.
Identification of controls on the back panel, specifically gas and power connections.
Guide for cleaning and replacing parts of the welding torch.
Instructions for replacing the gun liner.
Table listing common breakdowns, their causes, and solutions.
