Air Liquide SAFMIG 280 DBL User Manual

SAFMIG 280 BL-DBL
SAFMIG 400 BL-DBL
INSTRUCTION DE SECURITE D'EMPLOI ET D'ENTRETIEN
SAFETY INSTRUCTION FOR USE AND MAINTENANCE
EDITION : F/GB Notice d’emploi REF 8695-0463
REVISION : N Instructions for use
DS 371-50
DATE : 06-2003

Air Liquide SAFMIG 280 DBL Specifications

General

Brand	Air Liquide
Model	SAFMIG 280 DBL
Category	Welding System
Language	English

Summary

Safety Instructions

Electric Safety

Electrical safety, connection, maintenance, and troubleshooting.

Protection from Smoke, Vapors, Harmful and Toxic Gases

Safety regarding fumes, vapors, and harmful/toxic gases.

Protection from Luminous Radiation

Safety against luminous radiation and glare.

Protection from Noise

Safety measures related to noise levels.

Protection from Fire

Fire prevention and safety measures.

Safety in the Use of Gases

Safe handling and use of gases.

Safety of Persons

Personal safety precautions for operators.

General Informations

MIG-MAG Welding

Explanation of MIG-MAG welding process and types of transfer.

Welding Aluminium

Specific precautions and techniques for welding aluminum.

Description of Installations

Description of the SAFMIG 280 BL and components.

Description of Other Versions

Description of different versions (e.g., DBL).

Technical Characteristics of SAFMIG 280 BL/DBL

Technical specifications for the SAFMIG 280 BL/DBL.

Technical Characteristics of SAFMIG 400 BL/DBL

Technical specifications for the SAFMIG 400 BL/DBL.

Starting Up

Unpacking Set

Instructions for unpacking the welding unit.

Electrical Connection

Procedures for connecting the power source to the electrical mains.

Installation Equipment

Steps for installing wire feed units and torch.

Gas Connection

How to connect the gas cylinder and regulator.

Instructions for Use

Power On

Steps to power on the welding set and check indicators.

Welding Cycle

Explanation of welding cycle modes (2T, 4T, Spot).

Scope of Use

Recommended settings for different welding positions and materials.

Table of No-load Voltages

Table showing no-load voltages for SAFMIG 280/400 BL-DBL.

Options

Push-Pull Option

Description of the Push-Pull torch option for SAFMIG 400 BL.

DBL Option (Remote Wire Feed Unit)

Information about the remote wire feed unit (DBL) option.

Liquid-Cooled Option

Details on the liquid-cooled torch option.

Measuring Instruments Option

Option for analog welding current and voltage reading.

Polarity Inversion Option

Option to invert polarity for specific wire types.

Kit for Welding MAG CO2 Option

Kit for MAG CO2 welding connection.

Maintenance

Maintenance of Installation SAFMIG 280 BL/400 BL

Periodic inspection and cleaning of the welding unit.

Troubleshooting Procedure

Steps for diagnosing and resolving common malfunctions.

Spare Parts SAFMIG 280 BL - DBL

List of recommended spare parts for SAFMIG 280 BL-DBL.

Spare Parts SAFMIG 400 BL-DBL

Recommended spare parts for SAFMIG 400 BL-DBL.

Electrical Diagrams SAFMIG 280 BL/DBL 415 V

Electrical diagrams for SAFMIG 280/400 BL/DBL at 415V.

Electrical Diagrams SAFMIG 280 BL/DBL 220/380/440V

Electrical diagrams for SAFMIG 280/400 BL/DBL at 220/380/440V.

Electrical Diagrams SAFMIG 400 BL/DBL 415 V

Electrical diagrams for SAFMIG 400 BL/DBL at 415V.

Electrical Diagrams SAFMIG 400 BL/DBL 220 / 380 / 440 V

Electrical diagrams for SAFMIG 400 BL/DBL at 220/380/440V.

Electrical Diagrams SAFMIG 280 BL/400 BL

Electrical diagrams for SAFMIG 280/400 BL.

Electrical Diagrams SAFMIG 280/400 DBL

Electrical diagrams for SAFMIG 280/400 DBL.

Connection of Devisaf DBL with Power Sources

Wiring diagram for connecting Devisaf DBL to power sources.

MIG BL/DBL Cycle Board (Basic IC)

Diagram of the MIG BL/DBL cycle control board.