Air Liquide SAF-FRO SAFMIG 400 BLX User Manual

EN Safety instruction for use and maintenance - Do not destroy this manual
FR Instruction de securite d’emploi et d’entretien - Conserver ce livret d’instructions
ES Instrucciones de seguridad, empleo y mantenimiento - Conservar el presente manual
IT Istruzioni per la sicurezza nell’uso e per la manutenzione - Conservare il presente libretto
NL Veiligheidsinstructies voor gebruik en onderhoud - Bewaar deze handleiding
RO Instructiuni privind siguranta in exploatare si intretinerea - Pastrati acest manual
SK Bezpečnostné pokyny pri používaní a pri údržbe - Odložte si tento návod na použitie
www.airliquidewelding.com
Air Liquide Welding France • 25, boulevard de la Paix
CS30003 Cergy Saint Christophe • F-95895 CERGY PONTOISE Cedex
Cat. Nr.:
Rev.:
Date:
SAFMIG 300/400/500 BLX
86951099P
02
29. 09. 2015

Air Liquide SAF-FRO SAFMIG 400 BLX Specifications

General

Welding Process	MIG/MAG
Welding Current Range	30 - 400A
Wire Diameter Range	0.8 - 1.6mm
Protection Class	IP23
Duty Cycle	400A @ 60%
Power Supply	Three-phase

Summary

Safety Instruction for Use and Maintenance

General Safety Warning

Warns about the dangers of arc welding and plasma cutting.

1.3. TECHNICAL SPECIFICATIONS

2 - STARTING UP

2.1. INSTALLATION PROCESSUS

Provides step-by-step instructions for installing the SAFMIG BLX welding unit.

3 - INSTRUCTIONS FOR USE

3.1. ALIMENTATION / START UP / STOP

Explains how to power, start, and stop the SAFMIG BLX welding unit.

3.3. PRINCIPALES FUNCTIONS

Introduces the main functions and operating modes of the SAFMIG BLX for semi-automatic welding.

3.4. HELP WITH SETTINGS (E.S.P.)

Explains E.S.P. module for optimizing welding settings by material and gas.

1. Using the help module

3.5. CYCLE ADJUSTMENT

Details how to access and adjust all welding cycle parameters.

3.6. TROUBLESHOOTING

Provides guidance on diagnosing and resolving common operating faults.

4 - MAINTENANCE

5 - MAINTENANCE

5.2. DIAGNOSIS CHART

Provides a chart for diagnosing and resolving common faults in the welding unit.