To Next PageTo Next Page
Need help?Do you have a question about the Air Liquide SAF-FRO PRESTOTIG 240 AC/DC and is the answer not in the manual?
General| Input voltage | 230 V |
|---|---|
| Input current | 16 A |
| Welding current range | 5-240 A |
| Protection class | IP23 |
| Welding process | TIG, MMA |
Overview of the welding machine's type and applications.
Identification and description of the machine's front and rear panels.
Detailed explanation of the controls and functions on the setting panel.
Instructions for safely unpacking the welding equipment.
Guidelines for connecting the power source to the electrical supply.
Procedure for connecting the gas supply to the machine.
Technical details for the PRESTOTIG 240 AC/DC model.
Technical details for the PRESTOTIG 310 AC/DC model.
Step-by-step guide to power on and prepare the welding machine for use.
Explanation of different welding processes supported by the machine.
Information on selecting and preparing TIG welding electrodes.
Adjusting arc frequency for stable and narrow arcs.
Choosing waveform for noise level and penetration control.
Setting pre-heating time for 2-stroke function.
Using the THIN function for high-quality, rapid joining without distortion.
Controlling heat between electrode and workpiece using AC balance.
Procedure for accessing and configuring digital functions via SETUP A.
Essential maintenance tasks to keep the generator in optimal condition.
Explanation of the machine's internal safety systems and protections.
Remote control for adjusting welding current (MMA/TIG).
Footswitch for TIG 2 Time process.
Trolley option for transporting the power source and gas cylinder.
Overview of the welding machine's type and applications.
Identification and description of the machine's front and rear panels.
Detailed explanation of the controls and functions on the setting panel.
Instructions for safely unpacking the welding equipment.
Guidelines for connecting the power source to the electrical supply.
Procedure for connecting the gas supply to the machine.
Step-by-step guide to power on and prepare the welding machine for use.
Explanation of different welding processes supported by the machine.
Information on selecting and preparing TIG welding electrodes.
Adjusting arc frequency for stable and narrow arcs.
Choosing waveform for noise level and penetration control.
Setting pre-heating time for 2-stroke function.
Using the THIN function for high-quality, rapid joining without distortion.
Controlling heat between electrode and workpiece using AC balance.
Procedure for accessing and configuring digital functions via SETUP A.
Essential maintenance tasks to keep the generator in optimal condition.
Explanation of the machine's internal safety systems and protections.
Remote control for adjusting welding current (MMA/TIG).
Footswitch for TIG 2 Time process.
Trolley option for transporting the power source and gas cylinder.
Overview of the welding machine's type and applications.
Identification and description of the machine's front and rear panels.
Detailed explanation of the controls and functions on the setting panel.
Instructions for safely unpacking the welding equipment.
Guidelines for connecting the power source to the electrical supply.
Procedure for connecting the gas supply to the machine.
Step-by-step guide to power on and prepare the welding machine for use.
Explanation of different welding processes supported by the machine.
Information on selecting and preparing TIG welding electrodes.
Adjusting arc frequency for stable and narrow arcs.
Choosing waveform for noise level and penetration control.
Setting pre-heating time for 2-stroke function.
Using the THIN function for high-quality, rapid joining without distortion.
Controlling heat between electrode and workpiece using AC balance.
Procedure for accessing and configuring digital functions via SETUP A.
Essential maintenance tasks to keep the generator in optimal condition.
Explanation of the machine's internal safety systems and protections.
Remote control for adjusting welding current (MMA/TIG).
Footswitch for TIG 2 Time process.
Trolley option for transporting the power source and gas cylinder.
