Air Techniques ScanX Classic - Technical Data

Page 9Air Techniques, Inc.
Classic, Ortho & Intraoral
Electrical Requirements:
Supply Voltage: Universal: 100V to 240V (90V to 264V) 50/60 Hz
Supply Current: 1.2 A Maximum
Line Cord: North American style 10 foot long Hospital
Grade power cord, P/N 73096
Power Supply: 24 Volt Power Supply, P/N B7095 provided
Physical Properties: ScanX Intraoral, P/N F3600
ScanX Classic, P/N F3700 &
ScanX Ortho, P/N F3750
Dimensions: Length Width Height Length Width Height
15.5 in. 15.5 in. 16.0 in. 15.5 in. 15.5 in. 24.5 in.
(39.4 cm) (39.4 cm) (40.6 cm) (39.4 cm) (39.4 cm) (62.2 cm)
Weight: 44 lbs. (20 Kg) 51 lbs. (23.1 Kg)
Environmental Conditions:
Unit in Operation
Temperature: 50°F to 105°F (10°C to 40°C)
Humidity: 10 to 80% (Non-condensing)
Storage and Transport
Temperature: -21°F to 130°F (-29°C to 54°C)
Humidity: 10 to 80% (Non-condensing)
Note: Resolution of the device is dependent on operating mode and specific imaging
plate type used.
Resolution (LP/mm) Vertical Horizontal
Classic 3 to 18 3 to 12+
Intraoral 10 to 18 10 to 12+
Compliance Data:
Laser Classification: Class I Laser Product Compliance with
FDA HHS 21 CFR 1040.10 and IEC 60825-1
Laser Product Report
Accession Number: 0212282-00
Classification:
Class 1, No Applied Parts, Transportable, Continuous Operation,
Equipment not suitable for use in the presence of flammable anaesthetic mixture(s).
Electromagnetic Interference:
Electromagnetic interference between the equipment and other devices can occur. Do not use the
equipment in close conjunction with sensitive devices, or devices creating high electromagnetic
disturbances.
TECHNICAL DATA