AIROS 8 - Page 30

27
A8IFU.0001 REV C
6. Guidance & Manufacturer’s Declaration –
Electromagnetic Immunity (continued)
Recommended separation distances between portable and mobile RF
communications equipment and the AIROS 8 Sequential Compression Device.
The AIROS 8 Sequential Compression Device is intended for use in an
electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the AIROS 8 Sequential Compression Device can help
prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the AIROS
8 Sequential Compression Device as recommended below, according to the
maximum output power of the communications equipment.
For transmitters rated at a maximum output power not listed above, the recommended separation of distance (d) in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reection from structures, objects and people.
Rated maximum output
power of transmitter (W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80
MHz
d = 1.2√P
80 MHz to 800 MHz
d = 1.2√P
800 MHz to 2.5 GHz
d = 2.3√P
0.01 0.12 0.12 0.23
0.1 0.38 0.38 0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
Manufactured By: