Quick Start
Plug power cord into Skye and
wrap any excess cord around
the base.
Lift Skye back up and place it
an open space to aid airflow.
Plug the power cord into a
power outlet and press the
power button (on back).
Lay Skye down on its side (avoid
laying on its face). Unscrew the
base cover (turn left).
Remove the PRO-Cell
filter from Skye.
Remove outer plastic bag from
PRO-Cell filter.
Remove the UVC lamp from
the box.
Hold the base of the lamp
and plug into Skye until you
hear a click.
Place the PRO-Cell filter back into
Skye and screw the cover back on
(turn right) until you hear a click.
Download the “air health IAQ”
app to complete set-up and
enable controls from your phone.
FLIP OVER
To Next Page
