Air+Health Skye - Quick Start Guide Manual

Set-up Your Skye
Plug power cord into Skye
and wrap any excess cord
around the base.
Li Skye back up and place it
an open space to aid airflow.
Plug the power cord into a power
outlet and tap the power buon
(on back).
Lay Skye down on its side
(avoid laying on its face).
Unscrew the base cover
(turn counterclockwise).
Remove the PRO-Cell filter
from Skye.
Remove outer plasc bag
from PRO-Cell filter.
Remove the UVC lamp
from the box.
Hold the base of the lamp
and plug into Skye unl you
hear a click.
Place the "PRO-Cell" filter back into
Skye. Close the base cover by aligning
the arrows and then turning clockwise
into the locked posion. If the black
arow and the white dash are not
precisely aligned, the unit will not
turn on.
FLIP OVER FOR
HOW TO USE SKYE
Download the “air health IAQ”
app to complete set-up and
enable controls from your phone.