AirScape 1.0 User Manual

ORDER #:
S/N:
(Required for Warranty)
1.0 & 1.7
WHOLE HOUSE FAN
INSTALLATION AND OPERATION MANUAL
AirScape 1.0 & 1.7 Whole House Fan Installation Manual, 03222018
©AirScape, Inc., 2018. All Rights Reserved.
Page 1
Thank you for purchasing an AirScape
®
whole house fan. Your fan has been designed to provide your home with
natural, quiet, and energy-efcient cooling for many years.
Please take a few minutes to read over this manual and its accompanying documents to make sure you are pre-
pared to install the fan. In particular:
• The green THEORY OF OPERATION insert provides information critical to locating this fan within the home, and
to ensuring the home’s attic has adequate ventilation for its operation.
• This manual’s ELECTRICAL REQUIREMENTS section describes the electrical supply needed to operate this fan.
Before installing this fan, inspect it and all of its parts for any damage that may have been sustained
during shipping. DO NOT INSTALL DAMAGED EQUIPMENT. If you suspect this fan was damaged during
shipping, contact AirScape technical support by phone at 1.866.448.4187, or email at experts@airscape-
fans.com.
Whole House Fans are designed to be installed within a home’s attic, which makes them and their sub-com-
ponents extremely difcult to access once installed. TEST THIS FAN OUTSIDE OF THE ATTIC BEFORE IN-
STALLING IT. Connect the fan to its controls and to a power supply, and ensure it operates properly by
turning it on and cycling through its speed settings. If any difculties are encountered, contact AirScape
technical support at the numbers listed above.

AirScape 1.0 Specifications

Summary

Safety Information

Electrical Requirements

Specifies the voltage, amperage, and circuit needs for the fan models.

Unit Parts and Dimensions

1.0 WHF Dimensions

Provides the physical dimensions and clearance requirements for the 1.0 model.

1.7 WHF Dimensions

Provides the physical dimensions and clearance requirements for the 1.7 model.

Installation

Framing and Mounting

Details on framing rough openings and securely mounting the fan unit.

Wiring and Controls

Instructions for connecting the fan to its digital touch controller and power.

Wireless Remote and Accessories

Information on optional wireless remote and 2nd Generation Control Package.

Start-Up and Operation

Control Interface Overview

Explains the buttons and indicators on the fan's digital touch controller.

Operating Instructions

Details on how to turn the fan on, adjust speed, and use the timer.

Maintenance, Troubleshooting, and Technical Support

Specifications

Lists technical specifications for both 1.0 and 1.7 models.