Need help?Do you have a question about the AirSense 310e and is the answer not in the manual?
General| Brand | AirSense |
|---|---|
| Model | 310e |
| Category | Accessories |
| Language | English |
Explains the function of the front panel LED and LCD display for monitoring CO2 levels.
Procedures for safely opening the device cover and physically mounting it.
Details on connecting external wires, power, and understanding output signal options.
Steps to check if the voltage or current output connection is established correctly.
Instructions for reattaching the device cover after performing maintenance or adjustments.
Procedure to change the sensor's output range and thresholds for specific applications.
Steps to adjust sensor calibration based on operating altitude using a correction table.
Method to verify the sensor's calibration accuracy using outside air or known calibration gas.
Configuring the adjustable high CO2 limit and setting its threshold value.
Details on the optional contact closure and how to set its polarity.
General explanation of the duct sampling option for airflow analysis.
Lists duct kit components and provides instructions for installing the duct probe assembly.
States the product is not intended or authorized for life-safety critical applications.
Outlines the product's warranty terms, conditions, and remedies for defects.
To Next Page