Why is the feed air regulator leaking in my AirSep Oxygen Equipment?
If the feed air regulator in your AirSep Oxygen Equipment is leaking out of the bleed orifice, it could be due to a stuck feed air regulator main valve assembly or a defective main valve assembly seat. Try cleaning and lubricating the main regulator valve assembly. If that doesn't resolve the issue, rebuild or replace the regulator.
What to do if the filter drain valve remains open in AirSep AS-160?
If the filter drain valve in your AirSep Oxygen Equipment remains open and is not energized, it's likely that the valve is obstructed. Try cleaning or replacing the valve.
Why does the filter drain valve remain energized in AirSep AS-160?
If the filter drain valve in your AirSep Oxygen Equipment remains energized, it could be due to a stuck MANUAL DRAIN valve button or a defective circuit board. Try replacing the button, and if that doesn't work, replace the circuit board.
General| Oxygen Concentration | 93% ± 3% |
|---|---|
| Sound Level | 45 dBA |
| Operating Humidity | 15% to 95% non-condensing |
| Power Supply | AC |
| Operating Voltage | 120 V |
| Operating Temperature | 50°F to 104°F |
Highlights safety guidelines and important information, including WARNING, CAUTION, and NOTE messages.
Details hazards associated with oxygen, such as fire acceleration, and precautions to prevent them.
Illustrates external components like adsorbers, control panel, and enclosure on different models.
Illustrates and describes various manifold components such as filters, valves, and regulators.
Provides guidelines for inspecting, unpacking, and checking the oxygen generator for damage upon receipt.
Provides step-by-step instructions for starting the oxygen generator for the first time or after a shutdown.
Provides step-by-step instructions for replacing particulate and coalescing filter elements.
Explains how to adjust the feed air regulator for optimal pressure settings.
Provides instructions for adjusting the pressure switch settings for proper operation.
Provides a guide to diagnose and solve common problems with the oxygen generator.
Lists detailed technical specifications for AS-20 through AS-1000 oxygen generator models.
Details the warranty coverage, limitations, and terms for the AirSep Corporation PSA oxygen generator.
To Next Page
