Need help?Do you have a question about the AirSep AS-A and is the answer not in the manual?
General| Oxygen Concentration | 87% to 95% |
|---|---|
| Flow Rate | 0.5 to 5 LPM |
| Power Consumption | 350 Watts |
| Weight | 14 kg |
| Operating Temperature | 5°C to 40°C |
| Operating Humidity | Up to 95% non-condensing |
| Sound Level | 48 dBA |
Explains safety message symbols used in the manual.
Details fire and explosion risks associated with oxygen.
Explains the PSA process and generator components.
Details connecting the feed air hose and oxygen receiver.
Step-by-step guide for starting the generator for the first time.
Procedures for safely shutting down the oxygen generator.
Steps for adjusting the feed air regulator setting.
Procedure for adjusting the pressure switch settings.
Contact information for troubleshooting and parts.
Table listing problems, causes, and solutions.
General specifications for AS-A through AS-P models.
Detailed technical specifications for each oxygen generator model.
Details the warranty terms and conditions for the oxygen generators.
To Next Page
