AirSep
®
Corporation
2-2 AS-A—AS-P Series Instruction Manual
Before you attempt to install, operate, or repair the oxygen
generator, read and thoroughly understand this instruction
manual and the component manuals located in the Appendix D
of this instruction manual. Improper installation, operation, or
repairs can result in severe bodily injury, damage to the oxygen
generator, or poor performance.
The interior of the oxygen generator control cabinet contains
electrical parts that can produce an electrical shock hazard if
not handled properly. To prevent electrical shock, read and
thoroughly understand Section 8 — Troubleshooting in this
instruction manual before you service the oxygen generator.
AirSep oxygen generators are sold for use in industrial
applications only. Contact AirSep Corporation or an authorized
AirSep representative before you use this unit for any medical
application.
Disconnect power before servicing oxygen generator.
Do not disconnect protective earth
2.3 Safety Publications
The safety section of this instruction manual is not a complete summary of
required safety precautions. Review the following publications for additional
information on the safe handling of oxygen:
"Installation of Bulk Oxygen Systems at Consumer Sites;" NFPA
No. 50; National Fire Protection Association; 1 Batterymarch
Park; P. O. Box 9101; Quincy, Massachusetts 02269-9101 USA.
To Next Page
Loading...
Need help?
General
