Why does my AirSep newlife intensity alarm sound when it's running?
If the AirSep Air Compressor is on, the compressor is operating, there is a flow, but the audible alarm sounds, it may be due to an internal electrical fault or a pneumatic circuit fault. Stop the device and contact your distributor.
What to do if AirSep newlife intensity does not operate and the alarm sounds?
If the AirSep Air Compressor doesn't operate, the 0-I button is ON, and the alarm sounds continuously, first check the power cable connection to ensure it's properly plugged in. If the issue persists, check the fuses or circuit breaker fitted on the premises and reset the circuit breaker if necessary.
Why does my AirSep newlife intensity Air Compressor stop and start again?
If the AirSep Air Compressor stops mid-cycle and restarts after a few minutes, it may be due to the compressor thermal safety device being tripped. Stop the device and allow it to cool down. Also, check that the patient circuit is not obstructed. If the device still doesn't start after cooling, contact your distributor.
What to do if AirSep newlife intensity is running but there is no flow?
If the AirSep Air Compressor is on, the compressor is operating, but there is no flow and the alarm sounds, it could be due to a broken pneumatic connection or a compressor problem. Stop the device by pressing the 0-I button and contact your distributor.
How to fix interrupted airflow in AirSep newlife intensity?
If the oxygen-enriched air flow is interrupted at the nasal cannula outlet of your AirSep Air Compressor, check the gas administration circuit to ensure the tube is connected and the humidifier is tight.
What to do if AirSep newlife intensity Air Compressor flow is irregular?
If the flow at the nasal cannula outlet of the AirSep Air Compressor is irregular, it indicates a pneumatic circuit problem. Contact your distributor.
Why is the oxygen concentration indicator yellow on AirSep newlife intensity?
If the oxygen concentration indicator remains lit yellow on your AirSep Air Compressor, it means the oxygen concentration is too low. Contact your distributor.
What to do if alarm test doesn't work on AirSep newlife intensity?
If the alarm test does not work on your AirSep Air Compressor, it indicates an internal electrical fault. Contact your distributor.
Guidelines for handling oxygen safely, avoiding fire hazards, and ensuring proper ventilation.
Instructions for safe use and maintenance, including electrical safety and prescription adherence.
Step-by-step instructions for setting up and operating the device for direct oxygen therapy.
Details on the device's audible and visual alarms, and built-in safety mechanisms.
Key technical data including dimensions, weight, noise level, and flow rates.
Guidance on identifying and resolving common problems encountered with the device.
General| Oxygen Concentration | 93% ±3% |
|---|---|
| Oxygen Purity | 93% ±3% |
| Operating Pressure | 9.5 PSI |
| Noise Level | 45 dB |
| Power Supply | 110-120V, 60Hz |
To Next Page
