AirSep
®
Corporation
2-2 Onyx/Onyx+/Onyx Ultra Instruction Manual
Before you attempt to install, operate, or repair the oxygen
generator, read and thoroughly understand this instruction
manual. Improper installation, operation, or repairs can result in
severe bodily injury, damage to the oxygen generator, or poor
performance.
The interior of the oxygen generator control cabinet contains
electrical parts that can produce an electrical shock hazard if
not handled properly. To prevent electrical shock, read and
thoroughly understand Section 8 — Troubleshooting in this
instruction manual before you service the oxygen generator.
Disconnect power before servicing oxygen generator.
Do not disconnect protective earth
2.3 Safety Publications
This section is not a complete summary of required safety procedures. Review the
following publications for additional information on the safe handling of oxygen:
“Standard for Bulk Oxygen Systems at Consumer Sites;” NFPA No. 50;
National Fire Protection Association; 1 Batterymarch Park; P.O. Box
9101; Quincy, Massachusetts 02269-9101 USA.
“Oxygen;” Pamphlet G-4; Compressed Gas Association; 1725 Jefferson
Davis Highway; Arlington, Virginia 22202-4102 USA.
“Cleaning Equipment for Oxygen Service;” Pamphlet G-4.1;
Compressed Gas Association; 1725 Jefferson Davis Highway;
Arlington, Virginia 22202-4102 USA.
To Next Page
Loading...
Need help?
General
