7.0 Safety
7.1 Before repairs are attempted, be sure the power to the unit is off and locked out so accidental startup
cannot occur during repairs or troubleshooting.
7.1 When lifting the VCX pump, use proper and well maintained equipment to avoid injury.
7.3 Some surfaces on the VCX pump can become too hot to touch during normal operation. Do not
attempt to service the pump until it has cooled to room temperature.
7.4 Ensure the electrical installation is done by a qualified electrician in compliance with the National
Electrical Code and all local laws and regulations. Failure to do so can cause extreme injury including
death.
8.0 Storage
8.1 Store the unit in a clean dry place, using desiccant bags if excessive humidity is expected to avoid
rusting of the internals of the machine. Rotation of the shaft by hand is recommended if storing for more
than 6 months.
9.0 Disposal
9.1 Dispose of any waste oil in compliance with local codes and regulations.
To Next Page
Loading...
