AirTek CT 100 - User Manual

SMART CYCLE
COLD TRAP
REFRIGERATED
AIR DRYERS
OPERATORS MANUAL:
MODELS SC/CT 40 to 3000
Service Department
1-800-451-6023
MAN-SCCT
PRICE $10.00

Summary

Pre-Installation

Inspection, Handling and Setup

Inspect dryer upon arrival, note damage, file claims immediately.

Cautions and Operating Warnings

List of safety warnings and operating precautions for the dryer.

Dryer Installation

Location of Dryer

Airline Plumbing

Electrical Connections

Instructions for safely connecting the dryer to electrical power.

Dryer Startup Instructions

Steps for initial startup of the dryer.

Principle of Operation

Air System

Adjustable Controls

DEW POINT CONTROLLER

DISPLAYS and ALARMS

DEW POINT CONTROLLER AND DISPLAY

START UP FOR MODELS SC;CT 40 - 250

Operating Instructions:

Always:

Never:

START UP FOR MODELS SC;CT 330 and UP.

CAUTION: There should be no air flow through the dryer before or during start up.

DRYER START UP PROCEDURE:

Step-by-step guide for starting the dryer.

ROUTINE MAINTENANCE AND SERVICE

Air Cooled Condenser

Importance of cleaning the air-cooled condenser for optimal performance.

Separator;Coalescer Drains

FOR THE REFRIGERATION SERVICE TECHNICIAN

Recharging Dryer - Refrigerant, Oil and Dryers

Procedures for checking and adding refrigerant and oil.

Evaporator Leaks

Refrigerant Control Valves

Drains

Electronic Controls

Factory Assistance

Instructions for Ordering Parts

MISCELLANEOUS DRYER DATA

Capacity Correction Factory

Tables for correcting dryer capacity based on conditions.

Dryer Information Charts

Electrical Specifications

SMART CYCLE (SYSTEM LOADED)

SMART CYCLE (UNLOADED CYCLE)

Refrigerated Dryer Diagnostic Code

Diagnostic code “E1” Shutdown on Open Dew Point Circuit

Troubleshooting for E1 error code related to open dew point circuit.

Diagnostic code “E2” Shutdown on Shorted Dew Point Circuit

Troubleshooting for E2 error code related to shorted dew point circuit.

Diagnostic code “E3” Shutdown on High Super Heat

Troubleshooting for E3 error code related to high super heat.

Diagnostic code “E4” Shutdown on Freeze Protection

Diagnostic code “E5” High Dew Point Shutdown

Diagnostic code “E6” Shutdown on Low Suction PSI

Diagnostic code “E7” Shutdown on High Head PSI

Diagnostic code “E9” Drain Shutdown

INSTRUCTIONS FOR ORDERING REPAIR PARTS

REPLACING COALESCER ELEMENTS (CT UNITS ONLY)

METRIC CONVERSIONS

AIRTEK WARRANTY

The Airtek Warranty Philosophy

Explanation of Airtek's approach to warranty.

Warranty Procedure

Steps for initiating and managing warranty claims.

Smart Cycle; Cold Trap Coverage

What is covered by Standard Warranty (first year)

What is covered by Extended Warranty (second year)

What is Not Covered by Standard Warranty for all Dryer Lines

AirTek CT 100 Specifications

General

Brand	AirTek
Model	CT 100
Category	Dryer
Language	English