Need help?Do you have a question about the AirTek CT 165 and is the answer not in the manual?
Inspect dryer for damage upon arrival and note any issues on the freight bill for claims.
Lists critical safety rules for operating and maintaining the dryer unit safely.
Instructions for safe electrical hookup, including disconnect switches and grounding.
Steps for making electrical connections and preparing water supply.
Guidance on opening and operating specific refrigeration service valves.
Steps for powering on, cycling, and introducing air to the dryer.
Importance of keeping the condenser clean for optimal performance and longevity.
Procedures and considerations for refilling refrigerant and oil.
Methods for identifying leaks between the tube and shell sides of the evaporator.
Troubleshooting for open circuits affecting the dew point sensor.
Troubleshooting for short circuits in the dew point sensing circuit.
Identifies causes and solutions for high super heat conditions.
Addresses issues related to freezing and protection shutdowns.
Troubleshooting for shutdowns due to high dew point readings.
Troubleshooting for low suction pressure shutdowns.
Troubleshooting for shutdowns caused by excessive head pressure.
Troubleshooting for issues with the liquid line solenoid valve.
Causes and resolution for drain-related shutdowns.
To Next Page
General