Need help?Do you have a question about the AirTek CT 330-A4 and is the answer not in the manual?
Safety guidelines for unit operation, pressure, and environment.
Controls dew point, displays temp, and error codes.
Steps for initial power connection and setup for specific models.
Steps for initial power connection and setup for higher models.
Procedures for charging refrigerant and oil, and assessing charge.
Common issues with controllers and solenoids.
Technical data including HP, FLA, Volt, Amps, Fuse, Breaker, BTU, CFM, Oil.
Wiring diagram for specific models and voltage.
Wiring diagram for SC/CT 80 model at 115VAC.
Wiring diagram for SC/CT 100-165 models at 115VAC.
Wiring diagram for SC/CT 220-250 models at 115VAC.
Wiring diagram for SC/CT 300-1200 models at 115VAC.
Wiring diagram for SC/CT 1500 model at 115VAC.
Wiring diagram for SC/CT 2000-2500 models at 115VAC.
Wiring diagram for SC/CT 3000 model at 115VAC.
High voltage wiring for 230V/1PH/60HZ models.
High voltage wiring for 230V/460V/3PH/60HZ models.
Diagnosing and resolving open circuits in the dew point sensor.
Diagnosing and resolving short circuits in the dew point sensor.
Identifying causes for high super heat shutdown.
Troubleshooting freeze protection shutdowns and unloader valve issues.
Diagnosing high dew point alarms and compressor issues.
Troubleshooting low suction pressure and related issues.
Diagnosing high head pressure shutdown.
To Next Page
General