Need help?Do you have a question about the AirTek SC 165 and is the answer not in the manual?
Check for damage upon arrival and file claims immediately.
Safety guidelines for operation, pressure, and environment.
Covers voltage checks, disconnects, grounding, and wiring.
Explains the path and treatment of compressed air through the dryer.
Describes the components and function of the refrigerant cycle.
Describes the dew point display and its functions, including error codes.
Step-by-step guide for initial startup of specific models.
Comprehensive instructions for connecting power and initiating operation.
Specific startup steps for larger model series.
Guidance on charging refrigerant, oil, and assessing charge levels.
Troubleshooting evaporator leaks and refrigerant control valves.
Identifies and troubleshoots open circuits in the dew point sensor.
Identifies and troubleshoots short circuits in the dew point sensor.
Addresses high super heat conditions and potential causes.
Explains freeze protection shutdown and causes like unloader valve failure.
Details causes for high dew point shutdown, like compressor issues.
Explains low suction pressure shutdown and potential causes like low freon.
Covers causes of high head pressure shutdown, like overload or dirty condenser.
Explains the E9 alarm for continuous drain valve operation.
To Next Page
General