Need help?Do you have a question about the AirTek SC 80 and is the answer not in the manual?
Inspect dryer upon arrival for damage and file claims with carrier immediately.
Safety rules for operating the dryer, like not working under pressure or with power connected.
Instructions for making electrical connections, including disconnect switches and grounding.
Explains the air system components like precooler, evaporator, and separator for removing moisture.
Details the refrigeration cycle components: compressor, condenser, evaporator, and refrigerant flow.
Explains the dew point controller function and adjustment for setting dew point temperature.
Details the dew point controller and display functions, including modes, units, and error codes.
Indicates a high dew point condition and potential alarm activation.
Details settings for timed or float drains, including adjustment procedures.
Explains the function of inlet and outlet PSI gauges and pressure drop indication.
Covers ambient temperature display, alarms, and potential issues with high ambient temps.
Covers inlet temperature display, alarms, and potential issues with high inlet temps.
Step-by-step instructions for initial dryer start-up and power application.
Detailed steps for connecting power, applying voltage, and initial system checks.
Specific startup instructions for larger SC/CT dryer models.
General operational guidelines and best practices for using the dryer.
Prohibited actions and incorrect operational procedures for the dryer.
Maintenance for the air-cooled condenser, focusing on cleaning for optimal performance.
Instructions on refrigerant charging, oil levels, and assessment of charge adequacy.
Symptoms and methods for diagnosing evaporator leaks and potential repairs.
Information on expansion valves and their role in superheat control.
Troubleshooting drainage issues and checking float switches or solenoid valves.
Explanation of electronic control functions, solenoids, and troubleshooting diagnostic codes.
Guidelines for ordering replacement parts, including necessary information.
Tables and formulas for correcting dryer capacity based on operating conditions.
Diagram of the 115 VAC control circuit for SC/CT 3000 units.
High voltage wiring diagram for SC/CT 220-330 models.
Diagram detailing high voltage wiring for 230/460V 3PH/60HZ.
Diagram showing power connections for hermetic compressors.
To Next Page
General