Need help?Do you have a question about the AirTek SC 1500-A4 and is the answer not in the manual?
Inspect dryer upon arrival, note damage, and file claims with the carrier immediately.
Provides essential safety rules and operating precautions for safe dryer use.
Specifies ideal ambient temperature and ventilation requirements for dryer placement.
Details requirements for connecting air lines, including support and flexible hoses.
Covers safe electrical hookup, including disconnect switches and proper wiring.
Details the operation and adjustment of automatic and manual drain controls.
Explains how to adjust the dew point set point and its impact on dryer operation.
Directly controls dew point and provides digital display of measured and set point temperatures.
Activates when dew point is 15°F higher than set point or any diagnostic code is present.
Monitors ambient temperature, alarming if above 100°F to prevent system damage.
Monitors inlet air temperature, alarming if above 100°F to prevent dryer overloading.
Emphasizes reading the manual and avoiding airflow before startup for safety.
Step-by-step instructions for connecting power, water, and opening service valves.
Specific startup steps for larger models, including pump-down and service switch usage.
Focuses on keeping the condenser clean to ensure optimal performance and prevent damage.
Provides guidance on refrigerant charge assessment and oil addition for proper operation.
Explains factors like high ambient or airflow causing dryer overload and high discharge pressure.
Identifies issues like dirty coils or fan failure impacting condenser efficiency and head pressure.
Methods to check for excessive refrigerant charge causing high head pressure.
Explains how a faulty high-pressure switch can cause premature dryer shutdown.
Outlines the process for handling warranty situations and customer communication.
To Next Page
General