Do you have a question about the AirTek SC 250-A2 and is the answer not in the manual?
Safety precautions including not working under pressure or with power connected.
Instructions for safe electrical hookup, including disconnects and grounding.
Explains the air path through precooler, evaporator, and separator/coalescer.
Details the components and function of the refrigeration cycle.
Describes the dual mode controller and dew point readout.
Explains Load/No Load and Thermal Bank energy-saving modes.
Provides detailed instructions for initial dryer operation.
Provides detailed instructions for initial dryer operation for larger models.
Provides contact information for technical support.
Provides tables for correcting dryer capacity based on PSI, ambient, and inlet temperature.
Lists specifications like HP, FLA, Volt, Amps, Fuse, Breaker, BTU/HR, CFM, and Oil Change.
Provides detailed water flow, freon, and fan specifications.
Details shutdown for an open dew point circuit and troubleshooting steps.
Details shutdown for a shorted dew point circuit and troubleshooting steps.
Details shutdown for high super heat and its causes.
Details shutdown for low suction PSI and its causes.
Details shutdown for freeze protection and troubleshooting causes.
Details shutdown for high dew point and its causes.
Details shutdown for high head PSI and its causes.
Details shutdown for drain issues and alarm reset.
Outlines the steps for initiating a warranty claim and required information.