EasyManuals Logo

Airthings Wave User Manual

Airthings Wave
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
Technical specifications
Power supply: 2 AA 1.5V alkaline (LR6)
Dimensions: Diameter: 120 mm (4.72in)
Height: 36 mm (1.42in)
Weight: 216g including 2 batteries (7.6 oz)
Operational and storage environment:
Temperature: 4 °C (39 °F) to +40 °C (104 °F)
Radon details:
Initial accuracy/precision at 200 Bq/m
3
(5.4 pCi.L):
7 days ~ 10% ( 1 std deviation)
2 months ~ 5%
Measurement range: 0 Bq/m
3
to 20,000 Bq/m
3
(0 pCi/L to 540 pCi/L)
See more specs in our Wave 2
nd
gen Product Sheet
Safety and maintenance
The Airthings Wave is intended for indoor use only. Avoid
direct exposure to sunlight for long periods. Avoid
exposure to direct heat sources. For correct usage, make
sure the detector is operating in the specified temperature
range (see technical specifications).
Exposure to high humidity might permanently alter the
detector sensitivity or damage it.
Do not disassemble. If the detector does not work as
specified or you are in doubt, contact your local dealer or
visit us at Airthings.com.
Use a dry cloth to clean the detector.
When replacing the batteries, pay attention to the polarity
marks. Use AA alkaline (LR6) batteries.
Always snap the mounting bracket to the detector’s rear
side to protect the batteries, even when the detector is not
permanently mounted.
Disposal: electronic equipment.
Limited liability
The device is tested and quality-assured by production. It
meets the accuracy values set out in the specifications.
It is recommended to keep the device constantly activated
and the batteries in place until drained.
Airthings AS shall not be liable for damages related to
failure or loss of data arising from incorrect operations and
handling of the device.
Terms & conditions
airthings.com/terms-use-privacy/
For other languages or additional questions go to
support.airthings.com
The Bluetooth word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use
of such marks by Airthings is under license.
Copyright Airthings AS 2019

Other manuals for Airthings Wave

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Airthings Wave and is the answer not in the manual?

Airthings Wave Specifications

General IconGeneral
Accuracy10 %
Best usesHome
Product colorWhite
Interconnectable-
Detected gas typesRadon
Operating frequency868 MHz
Wireless technologyBluetooth
Measuring parametersRadon, Humidity, Temperature
Connectivity technologyWireless
Humidity measuring range (inside) (H-H)10 - 80 %
Temperature measurement range (inside) (T-T)4 - 40 °C
Battery life1.5 year(s)
Battery typeAA
Power sourceBattery
Input voltage- V
Input frequency- Hz
Battery technologyAlkaline
Number of batteries supported2
Storage relative humidity (H-H)0 - 85 %
Package depth156 mm
Package width142 mm
Package height55 mm
Package weight433 g
Quantity per pack1 pc(s)
Ethernet cableNo
Mounting optionYes
Master (outer) case volume5025 cm³
Pallet width800 mm
Pallet height1800 mm
Pallet length1200 mm
Pallet weight580237.95 g
Country of originChina
Pallet net weight555237.95 g
Quantity per pallet1599 pc(s)
Quantity per pallet layer41 pc(s)
Master (outer) case height210 mm
Master (outer) case length710 mm
Number of layers per pallet39 pc(s)
Master (outer) case net weight1610 g
Quantity per master (outer) case28 pc(s)
Maximum number of stacking cartons9 pc(s)
Weight and Dimensions IconWeight and Dimensions
Width120 mm
Height36 mm
Weight219 g

Related product manuals