Why does my Airwell Air Conditioner stop due to IDU defrosting protection?
If your Airwell Air Conditioner stops or its frequency goes down due to IDU defrosting protection, it might be due to: * Poor air-return in indoor unit. * Fan speed is abnormal. * Evaporator is dirty.
Why is there no feedback from the indoor motor of my Airwell AWAU-YHD009-H11?
If there is no feedback from the indoor motor of your Airwell Air Conditioner, it might be due to: * Bad contact of DC motor feedback terminal. * Bad contact of DC motor control end. * Fan motor is blocked. * Motor malfunction. * Malfunction of main board rev detecting circuit.
What causes a jumper cap malfunction in Airwell AWAU-YHD009-H11?
If your Airwell Air Conditioner shows a jumper cap malfunction, it may be due to: * No jumper cap insert on main board. * Incorrect insert of jumper cap. * Jumper cap damaged. * Abnormal detecting circuit of main board.
What causes HST over heating protection in Airwell Air Conditioner?
If your Airwell Air Conditioner displays HST over heating protection, it could be due to: * Insufficient attachment of IPM module to Heatsink. * Outdoor PCB problem.
Why is the outdoor DC fan motor malfunctioning on my Airwell AWAU-YHD009-H11 Air Conditioner?
If your Airwell Air Conditioner's outdoor DC fan motor is malfunctioning, it could be due to: * DC fan motor malfunction or blocked. * Bad connection.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Heating Capacity | 9500 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
| Coefficient of Performance (COP) | 3.61 |
| Indoor Unit Noise Level | 38 dB(A) |
| Type | Split System |
| Outdoor Unit Noise Level | 50 dB(A) |
Highlights the main technological innovations and benefits of the air conditioning units.
Detailed technical data for the HHD009 indoor and YHD009 outdoor units.
Detailed technical data for the HHD012 indoor and YHD012 outdoor units.
Detailed technical data for the HHD018 indoor and YHD018 outdoor units.
Overview of electronic control, abbreviations, and system operation.
Explains unit protections, ON/OFF buttons, and indicator lights.
Precautions and initial steps for electrical and control system issues.
Interpreting error codes displayed by the indoor/outdoor units.
Procedures for checking refrigeration, power, fan motor, compressor, and RV.
To Next Page